Fujitsu Laptop P 1032 User Manual

Fujitsu LifeBook  
P Series  
BIOS Guide  
LifeBook P Series Model:  
P-1032  
P-1035  
Document Date: 02/01/02  
Document Part Number: FPC58-0653-01  
F U J I T S U P C C O R P O R AT I O N  
 
M a i n M e n u  
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS  
The Main Menu allows you to set or view the current  
system parameters. Follow the instructions for  
Navigating Through the Setup Utility to make any  
P O I N T  
changes.  
System Time and System Date can also be set from your  
The following tables show the names of the menu fields  
for the Main menu and its submenus, all of the options  
for each field, the default settings and a description of  
the field’s function and any special information needed  
to help understand the field’s use.  
operating system without using the setup utility. Use  
the calendar and time icon on your Windows Control  
Panel. When you change these settings from your desk-  
top, the BIOS is automatically updated with the same  
changes.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power  
Boot  
Info  
Exit  
Item Specific Help  
System Time:  
System Date:  
[14:57:01]  
[01/26/2002]  
Adjust calendar clock.  
Primary Master  
Language:  
[TOSHIBA MK2018GAP-(PM)]  
[English (US)]  
<Tab>, <Shift-Tab>, or  
<Enter> selects field.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 1. Main Menu  
3
 
L i f e B o o k  
P
S e r i e s B I O S  
Menu Field  
Options  
Default  
Description  
System Time:  
–—  
–—  
Sets and displays the current time. Time is in a 24 hour format of  
hours:minutes:seconds with 2 digits for each. (HH:MM:SS). Exam-  
ple: 16:45:57. You may change each segment of the time  
separately. Move between the segments with the [Tab] key and/or  
[Shift] + [Tab] keys.  
System Date:  
–—  
–—  
Sets and displays the current date. Date is in a month/day/year  
numeric format with 2 digits each for month and day and 4 digits  
for year. (MM/DD/YYYY) for example: 03/20/1998. You may  
change each segment of the date separately. Move between the  
segments with the [Tab] key and/or [Shift] + [Tab] keys.  
Primary Master:  
Language:  
Selects Primary  
Master submenu  
–—  
Displays the type of device on this ATA/ATAPI interface, if there is  
one. Pressing the Enter key selects the Primary Master submenu  
allowing additional device configuration options for this interface.  
English (US)  
Japanese (JP)  
[English (US)]  
The default setting differs between the US/European and the Japa-  
nese model. Selects the display language for the BIOS.  
4
 
M a i n M e n u  
Note: Actual hard drive label shown may vary. Depending  
on the drive type, information such as cylinders, heads and  
sectors may also be displayed.  
Primary Master Submenu of the Main Menu  
The Primary Master submenu identifies which ATA  
devices are installed.  
PhoenixBIOS Setup Utility  
Security Power Boot  
Main  
Advanced  
Info  
Exit  
Item Specific Help  
Primary Master [FUJITSU MHM2200AT-(PM)]  
Select ATA/ATAPI drive  
installed here.  
Type:  
Cylinders:  
Heads:  
Sectors:  
Maximum Capacity:  
[Auto]  
[16383]  
[16]  
[63]  
8455MB  
[Auto]  
The BIOS auto-types the  
drive on boot time.  
Multi-Sector Transfers:  
LBA Mode Control:  
PIO Transfer Mode:  
DMA Transfer Mode:  
[16 Sectors]  
[Enabled]  
[FAST PIO 4]  
[Ultra DMA 4]  
Except [Auto]  
You enter parameters of  
the drive.  
[None]  
The drive is disabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9  
Setup Defaults  
Enter  
Select  
Sub-Menu  
F10 Save and Exit  
Figure 2. Primary Master Submenu  
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
Type:  
Auto  
None  
[Auto]  
(Note: There is no drop-down menu available for the Type field. To  
change the options, use the plus +and minus -keys.)  
CD-ROM  
Hard Disk  
Selects the ATA/ATAPI device type. Select Auto to have the type  
automatically identified by the BIOS at POST. If None is selected, all  
of the following Set-up items do not appear. If Hard Disk is  
selected, you must specify the number of Cylinders, Heads, and  
Sectors for the drive. The CD-ROM option is not currently used; it is  
reserved for future use.  
Cylinders:  
Heads:  
A number between  
–—  
–—  
This item appears only when the type is identifed as Hard Disk.  
When Hard Disk is selected, you can change the value. This field is  
changed by incrementing (pressing the [Spacebar]) or by typing in  
the number.  
0 and 65,535  
A number between 1  
and 16  
This item appears only when the type is identifed as Auto or Hard  
Disk. When Hard Disk is selected, you can change the value. This  
field is changed by incrementing (pressing the [Spacebar]) or by  
typing in the number.  
5
 
L i f e B o o k  
P
S e r i e s B I O S  
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
Sectors:  
A number between  
0 and 63  
–—  
This item appears only when the type is identifed as Auto or Hard  
Disk. When Hard Disk is selected, you can change the value. This  
field is changed by incrementing (pressing the [Spacebar]) or by  
typing in the number.  
Maximum  
Capacity:  
Display only  
–—  
Displays the maximum capacity of the drive calculated from the  
parameters of the hard disk when Hard Disk is selected.  
Multi-Sector  
Transfers:  
Disabled  
[16 Sectors]  
This option cannot be changed when Auto is selected. Specify the  
number of sectors per block for multiple sector transfer.  
2 Sectors  
4 Sectors  
8 Sectors  
16 Sectors  
32 Sectors  
64 Sectors  
128 Sectors  
LBA Mode  
Control:  
Disabled  
Enabled  
[Enabled]  
Enables or disables logical Block Addressing in place of Cylinder,  
Head, Sector addressing. This option cannot be changed when  
Auto is selected.  
PIO Transfer  
Mode:  
Standard  
[Fast PI0 4]  
Selects the method for moving data to/from the drive. Autotype  
the drive to select the optimum transfer mode. This option cannot  
be changed when Auto is selected. Multi-word DMA is automati-  
cally set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to  
mode 2 for Fast PIO 4 / DMA.  
Fast PIO 1  
Fast PIO 2  
Fast PIO 3  
Fast PIO 4  
DMA Transfer  
Mode:  
Disabled  
[Ultra DMA 4]  
Selects the method for moving data to/from the drive. Autotype  
the drive to select the optimum transfer mode. This option cannot  
be changed when Auto is selected.  
Multiword DMA 1  
Multiword DMA 2  
Ultra DMA 0  
Ultra DMA 1  
Ultra DMA 2  
Ultra DMA 3  
Ultra DMA 4  
6
 
A d v a n c e d M e n u  
ADVANCED MENU SETTING DEVICE FEATURE CONTROLS  
The Advanced Menu allows you to:  
Follow the instructions for Navigating Through the  
Setup Utility to make any changes.  
Enable or disable support for Plug & Play  
operating systems.  
Select between the display panel and an external  
CRT display.  
Enable or disable compensation for your display.  
Configure PCI devices in your system.  
Configure CPU and USB features.  
The following tables show the names of the menu fields  
for the Advanced Menu and its submenus, all of the  
options for each field, the default settings and a descrip-  
tion of the fields function and any special information  
needed to help understand the fields use.  
PhoenixBIOS Setup Utility  
Security Power Boot  
Main  
Advanced  
Info  
Exit  
Item Specific Help  
Plug & Play O/S:  
[No]  
[No]  
Keyboard/Mouse Features  
Video Features  
The BIOS configures  
also non-boot devices.  
Select if you are using  
a non-Plug & Play OS or  
a non-ACPI OS.  
Internal Device Configurations  
PCI Configurations  
CPU Features  
USB Features  
[Yes]  
Event Logging  
The BIOS configures  
only boot devices.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 3. Advanced Menu  
7
 
L i f e B o o k  
P
S e r i e s B I O S  
Table 3: Fields, Options and Defaults for the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Plug & Play O/S:  
No  
Yes  
[No]  
Select Yes if you are using a Plug & Play capable operating system.  
Select No if you need the BIOS to configure non-boot devices.  
Keyboard/Mouse  
Features  
–—  
–—  
–—  
–—  
–—  
–—  
When selected, opens the Keyboard/Mouse Features submenu, which allows setting  
external and internal keyboard and mouse parameters.  
Video Features  
When selected, opens the Video Features submenu, which allows setting of the display  
parameters, including routing of video signals to different displays.  
Internal Device  
Configurations  
When selected, opens the Internal Device Configurations submenu, which allows  
enabling or disabling the Floppy Disk, IDE, and LAN Controllers.  
PCI Configurations  
CPU Features  
–—  
–—  
–—  
–—  
When selected, opens additional menus to configure PCI devices.  
When selected, opens the CPU Features submenu, which allows enabling or disabling  
of Processor Serial Number feature.  
USB Features  
Event Logging  
–—  
–—  
–—  
–—  
When selected, opens the USB Features submenu, which allows enabling or disabling  
USB.  
When selected, opens the event logging submenu.  
8
 
A d v a n c e d M e n u  
Keyboard/Mouse Features Submenu of the Advanced Menu  
The Keyboard/Mouse Features submenu is for setting the  
parameters of the integrated and external mouse  
and keyboard.  
.
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Keyboard/Mouse Features  
Item Specific Help  
Select power-on state  
for Numlock.  
Numlock:  
Internal Pointing Device:  
[Auto]  
[Manual Setting]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 4. Keyboard/Mouse Features Submenu  
Table 4: Fields, Options and Defaults for the Keyboard/Mouse Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Numlock:  
Auto  
On  
[Auto]  
Sets the NumLock function state when the computer  
completes booting.  
Off  
Internal Pointing  
Device:  
Manual Setting  
Always Enabled  
Always Disabled  
[Manual Setting]  
Configures the internal pointing device. When Manual Setting is  
selected, the internal pointing device can be enabled or disabled by  
using the [Fn] + [F4] keys. When Always Enabled is selected, the  
internal device is always selected. When Always Disabled is  
selected, the internal pointing device cannot be used.  
9
 
L i f e B o o k  
P
S e r i e s B I O S  
Video Features Submenu of the Advanced Menu  
The Video Features Submenu is for setting the  
display parameters.  
PhoenixBIOS Setup Utility  
Security Power Savings Exit  
Main  
Advanced  
Video Features  
[Internal Flat Panel]  
Item Specific Help  
Display  
Compensation: [Enabled]  
Select display terminal.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 5. Video Features Submenu  
Table 5: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Display:  
Internal  
Flat-Panel  
[Internal  
Flat-Panel]  
Selects where the video signal will be routed.  
External  
Simultaneous  
Compensation:  
Disabled  
Enabled  
[Enabled]  
Enables or disables compensation which controls spacing on the  
display. When enabled, displays with less than pixel resolution  
800 x 600 will still cover the entire screen.  
10  
 
A d v a n c e d M e n u  
Internal Device Configurations Submenu of the Advanced Menu  
The Internal Device Configurations submenu allows the  
user to configure other internal devices.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Internal Device Configurations  
Item Specific Help  
IDE Controller:  
Touch Panel:  
[Enabled]  
[Enabled]  
[Disabled]  
IDE port is disabled.  
[Enabled]  
IDE port is enabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 6. Internal Device Configurations Submenu  
Table 6: Fields, Options and Defaults for the Internal Device  
Configurations Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
IDE Controller:  
Disabled  
Enabled  
[Enabled]  
Enables or disables selected IDE controller.  
Touch Panel:  
Disabled  
Enabled  
[Enabled]  
Enables or disables touch panel.  
11  
 
L i f e B o o k  
P
S e r i e s B I O S  
PCI Configurations Submenu of the Advanced Menu  
The PCI Configurations submenu allows the user to  
reserve specific interrupts (IRQs) for legacy ISA devices,  
and to enable or disable built in PCI device modules.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
PCI Configurations  
IRQ Reservation  
Security  
Power Savings  
Exit  
Item Specific Help  
Reserve specific IRQs  
for use by legacy ISA  
devices.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 7. PCI Configurations Submenu  
Table 7: Fields, Options and Defaults for the PCI Configurations Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
IRQ Reservation  
–—  
–—  
Reserve specific IRQs for use by legacy ISA devices.  
12  
 
A d v a n c e d M e n u  
IRQ Reservation Submenu of the PCI Configurations Submenu  
The IRQ Reservation submenu of the PCI Configura-  
tions submenu allows the user to mark various IRQs as  
reserved for use by legacy ISA devices. When an IRQ is  
reserved, the BIOS does not use it for embedded PCI or  
ISA devices.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
IRQ Reservation  
Item Specific Help  
IRQ 3:  
IRQ 4:  
IRQ 5:  
IRQ 7:  
IRQ 9:  
IRQ 10:  
IRQ 11:  
IRQ 15:  
[Available]  
[Available]  
[Available]  
[Available]  
[Available]  
[Available]  
[Available]  
[Available]  
Reserve the specified  
IRQ for use by legacy  
ISA devices.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 8. IRQ Reservation Submenu  
Table 8: Fields, Options and Defaults for the IRQ Reservation Submenu of the PCI Configurations Submenu  
Menu Field  
Options  
Default  
Description  
IRQ 3:  
Available  
Reserved  
[Available]  
Reserves IRQ 3. If Reserved is selected, BIOS reserves IRQ 3 for use by  
legacy ISA devices and does not use it for embedded PCI/ISA devices.  
IRQ 3 is removed from the IRQ bitmap in the PCI IRQ routing table.  
IRQ 4:  
IRQ 5:  
IRQ 7:  
IRQ 9:  
IRQ 10:  
IRQ 11:  
IRQ 15:  
Available  
Reserved  
[Available]  
[Available]  
[Available]  
[Available]  
[Available]  
[Available]  
[Available]  
Reserves IRQ 4.  
Reserves IRQ 5.  
Reserves IRQ 7.  
Reserves IRQ 9.  
Reserves IRQ 10.  
Reserves IRQ 11.  
Reserves IRQ 15.  
Available  
Reserved  
Available  
Reserved  
Available  
Reserved  
Available  
Reserved  
Available  
Reserved  
Available  
Reserved  
13  
 
L i f e B o o k  
P
S e r i e s B I O S  
CPU Features Submenu of the Advanced Menu  
The CPU Features submenu configures certain features  
of the CPU in the system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
CPU Features  
Item Specific Help  
Processor Serial Number:  
[Disabled]  
Configures Processor  
Serial Number feature  
of Pentium(R) III  
processor.  
[Disabled]  
Processor Serial Number  
feature is disabled.  
[Enabled]  
Processor Serial Number  
feature is enabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 9. CPU Features Submenu  
Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Processor Serial  
Number:  
Enabled  
Disabled  
[Disabled]  
Enables or disables the Processor Serial Number feature of the  
processor.  
14  
 
A d v a n c e d M e n u  
USB Features Submenu of the Advanced Menu  
The USB Features submenu configures the USB capabili-  
ties of the system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
USB Features  
Item Specific Help  
USB Storage Device:  
[Enabled]  
[Disabled]  
Legacy Storage Device  
Emulation is disabled.  
[Enabled]  
Legacy Storage Device  
Emulation is enabled.  
USB floppy and/or USB  
CD-ROM are available  
without USB aware OS.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 10. USB Features Submenu  
Table 10: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
USB Storage  
Device:  
Disabled  
Enabled  
[Enabled]  
When enabled, Legacy Storgae Device Emulation is enabled and  
USB floppy and/or CD-ROM are available without USB-aware OS.  
15  
 
L i f e B o o k  
P
S e r i e s B I O S  
Event Logging Submenu of the Advanced Menu  
The Event Logging submenu is for setting up the logs for  
DMI event logging.  
PhoenixBIOS Setup Utility  
Security Power Savings Exit  
Main  
Advanced  
Event Logging  
Item Specific Help  
Event Log Capacity:  
Event Log Validity:  
Space Available  
Valid  
Press <Enter> key to  
view the contents of  
the event log.  
View Event Log:  
[Enter]  
Event Logging:  
[Enabled]  
[Disabled]  
System Boot Event:  
Clear All Event Logs:  
Mark Events as Read:  
[No]  
[Enter]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 11. Event Logging Submenu  
Table 11: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Space Available  
Valid  
Description  
Event Log Capacity:  
Event Log Validity:  
View Event Log:  
Event Logging:  
Display only  
Display only  
Enter  
[Enter]  
Allows you to view content of event log.  
Turns event logging on and off for all DMI events.  
Disabled  
Enabled  
[Enabled]  
System Boot  
Event:  
Disabled  
Enabled  
[Disabled]  
[No]  
Turns event logging on and off for DMI system boot events.  
When set to [Yes] all event logs will be cleared at next boot.  
Allows you to make all events currently in the event log as read.  
Clear All Event Logs:  
Mark Events as Read:  
No  
Yes  
Enter  
[Enter]  
16  
 
S e c u r i t y M e n u  
SECURITY MENU SETTING THE SECURITY FEATURES  
The Security menu allows you to set up the data security  
features of your notebook to fit your operating needs and  
to view the current data security configuration. Follow  
the instructions for Navigating Through the Setup Utility  
to make any changes.  
P O I N T S  
If you make an error when re-entering the password  
a [Warning] will be displayed on the screen. To try  
again, press the Enter key and then retype the pass-  
word. Press the Esc key to abort the password setting  
process.  
Entering a password incorrectly three times in a row  
will cause the keyboard and mouse to be locked out  
and the warning [System Disabled] to be displayed. If  
this happens, restart the computer by turning off and  
on the power with the power switch and use the  
correct password on reboot.  
The following tables show the names of the menu fields  
for the Security menu and its submenus, all of the  
options for each field, the default settings and a  
description of the fields function and any special  
information needed to help understand the fields use.  
The default condition is no passwords required and no  
write protection.  
If the Password on Resume is Enabled and the Pass-  
word on Boot is Disabled you will not have to type  
your password upon resuming the system from the  
Suspend or Save-to-Disk modes. Power Management  
Security will work only if Password on Boot is  
enabled.  
P O I N T  
If you set a password, write it down and keep it in a  
safe place. If you forget the password you will have to  
contact your support representative to regain access to  
your secured functions and data.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power  
Boot  
Info  
Exit  
Item Specific Help  
Supervisor Password Is:  
User Password Is:  
Clear  
Clear  
Press <Enter> key to  
set Supervisor password  
to enable any password  
features.  
Set Supervisor Password  
Set User Password  
Minimum User Password Length  
[Enter]  
[Enter]  
[0]  
Then password entry is  
required to enter BIOS  
Setup.  
Password on Boot:  
Password on Resume:  
[Disabled]  
[Disabled]  
Boot from Removable Media:  
Floppy Disk Access:  
Hard Disk Security  
[All]  
[All]  
Owner Information  
Hard Disk Boot Sector:  
[Normal]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 12. Security Menu  
17  
 
L i f e B o o k  
P
S e r i e s B I O S  
Table 12: Fields, Options and Defaults for the Security Menu  
Menu Field  
Options  
Default  
Description  
Supervisor  
Password is:  
–—  
Clear  
A display-only field. Set is displayed when the system supervisor pass-  
word is set and Clear when it is not.  
User Password is:  
–—  
–—  
Clear  
A display-only field. Set is displayed when the general user  
password is set, and Clear when it is not.  
Set Supervisor Pass-  
word  
[Enter]  
Sets, changes or cancels the Supervisor Password. The Supervisor  
Password may be up to seven characters long and must include only  
letters or numbers (no symbols). Passwords are NOT  
case- sensitive. To cancel a password press the Enter key instead of  
entering characters in the Enter New Password field and in the  
Re-enter New Password field. When a Supervisor Password is set  
it must be used to access the BIOS setup utility.  
Set User Password  
–—  
–—  
[Enter]  
Can only be accessed if Supervisor Password is set. Sets, changes or  
cancels the User Password. The User Password may be up to seven  
characters long and must include only letters or numbers (no sym-  
bols). Passwords are NOT case-sensitive. To cancel a password press  
the Enter key instead of entering characters in the Enter New Pass-  
word field and in the Re-enter New Password field. When a User  
Password is set it must be used to access the BIOS setup utility.  
Minimum User  
[0]  
–—  
Password Length:  
Password on Boot:  
Disabled  
First Boot  
Every Boot  
[Disabled]  
When set to Disabled, no password is required. When set to First  
Boot, password entry required only before first boot. When Every  
Boot is selected, password required whenever the system is booted.  
Password On Resume:  
Disabled  
Enabled  
[Disabled]  
[All]  
When Enabled, PS/2 keyboard and mouse inputs are locked out upon  
Resume From Suspend or Save-to-Disk until entering password.  
Boot from Removable  
Media:  
All  
Supervisor only  
When Supervisor Only is selected, only the Supervisor can boot from  
removeable media. Only the user who enters the Supervisor Password  
before OS boot is treated as the Supervisor.  
When All is selected, boot from removeable media is not restricted.  
Floppy Disk Access:  
All  
Supervisor only  
[All]  
When Supervisor Only is selected, only the Supervisor can access the  
floppy disk. Only the user who enters the Supervisor Password before  
OS boot is treated as the Supervisor. When All is selected, floppy disk  
access is not restricted.  
Hard Disk Security:  
Owner Information:  
–—  
–—  
–—  
Configures hard disk security features.  
Sets Owner information.  
–—  
Hard Disk Boot Sec-  
tor:  
Normal  
Write Protected  
[Normal]  
Sets protection mode for hard disk drive.  
move to another menu. If you wish to exit from setup  
utility, press the [Esc] key to go to the Exit Menu. If you  
wish to move to another menu, use the cursor keys.  
Exiting from the Security Menu  
When you have finished setting the parameters on the  
Security Menu, you can either exit from setup utility or  
18  
 
S e c u r i t y M e n u  
Hard Disk Security Submenu of the Security Menu  
The Hard Disk Security submenu is for configuring hard  
disk security features.  
PhoenixBIOS Setup Utility  
Security Power Savings Exit  
Main  
Advanced  
Hard Disk Security  
[Disabled]  
Item Specific Help  
Primary Master:  
[Disabled]  
The feature is disabled.  
[Enabled]  
The hard disk is locked  
with the pasword. Data  
in the locked disk  
cannot be read on any  
systems other than the  
original system on which  
it was locked, or on  
systems that have the  
identical password  
setting.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 13. Hard Disk Security Submenu  
Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu  
Menu Field  
Options  
Default  
Description  
Primary Master:  
Disabled  
Enabled  
[Disabled]  
Disabled: No password protection.  
Enabled: Hard drive is locked with the password. Data in the locked  
disk cannot be read on any systems other than the original system  
on which it was locked, or on systems that have the identical pass-  
word setting.  
19  
 
L i f e B o o k  
P
S e r i e s B I O S  
Owner Information Submenu of the Security Menu  
The Owner Information submenu is for setting owner information.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power  
Boot  
Info  
Exit  
Item Specific Help  
Owner Information Is:  
Set Owner Information  
Clear  
[Enter]  
Foreground Color:  
Background Color:  
[Gray]  
[Black]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 14. Owner Information Submenu  
Table 14: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu  
Menu Field  
Options  
–—  
Default  
Clear  
Description  
Owner Information Is:  
Display only.  
Set Owner  
Information:  
–—  
[Enter]  
Field to write owner  
information, i.e. name.  
Foreground Color:  
Background Color:  
Black  
Blue  
Green  
Cyan  
Red  
Brown  
White  
Gray  
Light Blue  
Light Green  
Light Cyan  
Light Red  
Light Magenta  
Light Yellow  
Bright White  
[Gray]  
Magenta  
Black  
Blue  
Brown  
White  
Light Cyan  
Light Red  
[Black]  
Green  
Cyan  
Red  
Gray  
Light Blue  
Light Green  
Light Magenta  
Light Yellow  
Bright White  
Magenta  
20  
 
P o w e r M e n u  
POWER MENU SETTING POWER MANAGEMENT FEATURES  
The Power menu allows you to set and change the power  
management parameters. Follow the instructions for  
Navigating Through the Setup Utility to make any  
changes.  
The following tables show the names of the menu fields  
for the Power menu and its submenus, all of the options  
for each field, the default settings and a description of  
the fields function and any special information needed  
to help understand the fields use.  
PhoenixBIOS Setup Utility  
Security Power Boot  
Main  
Advanced  
Info  
Exit  
Item Specific Help  
Power Savings:  
[Customized]  
[Off]  
[Off]  
[4 Minutes]  
[15 Minutes]  
Hard Disk Timeout:  
Display Timeout:  
Standby Timeout:  
Auto Suspend Timeout:  
Select Power Management  
Mode. Choosing modes  
changes system power  
management settings.  
Maximum Power Savings  
conserves the greatest  
amount of system power  
while Maximum  
Suspend Mode:  
Auto Save To Disk:  
[Suspend]  
[Off]  
Resume On Modem Ring:  
Resume On Time:  
Resume Time:  
[Off]  
[Off]  
[00:00:00]  
Performance conserves  
power but allows  
greatest system  
performance. To alter  
these setting, choose  
Customize. To turn off  
power management,  
Advanced Features  
choose Disabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 15. Power Menu  
Table 15: Fields, Options and Defaults for the Power Menu  
Menu field  
Options  
Default  
Description  
Power Savings:  
Disabled  
Customized  
Maximum  
Power Savings  
[Customized]  
Sets the power savings parameters to a factory installed  
combination of parameters, a custom set of parameters set  
by you or no power saving features.  
Maximum  
Performance  
Hard Disk  
Timeout:  
Off  
30 seconds to  
20 Minutes  
[Off]  
[Off]  
Sets the length of time that the hard drive can be inactive before your note-  
book automatically turns off the power to the hard drive controller and drive  
motor. If you choose a factory installed combination of parameters this field  
will display the setting. If you choose to customize the parameters you will  
be able to set this yourself. The options available vary from Off, which has  
no inactivity shutoff, to 20 minutes.  
Display  
Timeout:  
Off  
2 to 20 Minutes  
Sets the length of time without any user input device activity before the  
display is turned off. If you choose a factory combination of parameters, this  
field will display the setting. If you choose to customize the parameters, you  
will be able to set this yourself. Off has no inactivity shutoff.  
21  
 
L i f e B o o k  
P
S e r i e s B I O S  
Table 15: Fields, Options and Defaults for the Power Menu  
Menu field  
Options  
Default  
Description  
Standby  
Timeout:  
Off  
1 to 16 Minutes  
[4 Minutes]  
Sets the length of time without any user input device activity before the CPU  
is set to half speed and the display and the hard drive are turned off. If you  
choose a factory combination of parameters this field will display the setting.  
If you choose to customize the parameters you will be able to set it yourself.  
Auto Suspend  
Timeout:  
Off  
5 to 60 minutes  
[15 Minutes]  
[Suspend]  
Sets the length of time without any I/O activity before your note-book goes  
into Suspend mode. If you choose a factory combination of parameters this  
field will display that setting. If you choose to customize the parameters you  
will be able to set this yourself. Off has no inactivity suspension.  
Suspend  
Mode:  
Suspend  
Save to Disk  
Sets the form of suspension state. If you choose Suspend, you will suspend  
operation with power to system memory, and everything else powered  
down or in a very low power state. If you choose Save-to-Disk your note-  
book will save all of system memory and the operating parameters to the  
hard drive before turning your notebook to the pseudo-off condition.  
Auto Save  
to Disk:  
Off  
After 1 Hour  
[Off]  
[Off]  
When set to “After 1 Hour”, your notebook will automatically save all  
system memory and the operating parameters to the hard drive and go to  
pseudo-off if the notebook is left in Suspend mode for more than an hour.  
Resume On  
Modem Ring:  
Off  
On  
Sets whether or not to Resume from a suspension state when a message is  
received by telephone line. This feature will not operate if the Save-to-Disk  
mode is enabled. This feature applies to internal and external modems.  
Resume On  
Time:  
Off  
On  
[Off]  
Sets whether or not to resume from a suspension state at a designated time.  
This feature is available from either the Suspend or Save-to-Disk modes.  
Resume Time:  
–—  
[00:00:00]  
Sets the designated time, on a 24-hour clock, when the notebook is to auto-  
matically resume operation from the Suspend state. The format of the clock  
setting is hours:minutes:seconds. Each segment of the time is set separately,  
either by incrementing or by typing in the numbers. You move between the  
segments with the [Tab] key or the [Shift]+[Tab] keys. This only applies  
when Resume on Time is set to On.  
Advanced  
Features:  
–—  
–—  
When selected, opens the Advanced Features submenu which allows  
setting additional power saving parameters.  
Factory Installed Values for Power Saving Profiles  
Hard Disk  
Timeout  
Video  
Timeout  
Standby  
Timeout  
Auto Suspend  
Timeout  
Customized:  
Off  
Off  
4 Minutes  
1 Minute  
Off  
15 Minutes  
5 Minutes  
15 Minutes  
Off  
Maximum Power Savings:  
Maximum Performance:  
Disabled:  
30 Seconds  
Off  
2 Minutes  
Off  
Off  
Off  
Off  
Sample Customized Profile: (To get even better battery  
life keep the display and volume settings as low as pos-  
sible and use the sample customized profile.)  
2 Minutes  
1 Minute  
1 Minute  
5 Minutes  
22  
 
P o w e r M e n u  
Advanced Features Submenu of the Power Menu  
The Advanced Features submenu is for setting some non-time related power saving parameters.  
PhoenixBIOS Setup Utility  
Power  
Advanced Features  
Item Specific Help  
Suspend/Resume Switch:  
[Enabled]  
Configures the  
Lid Closure Suspend:  
Lid Open Resume:  
[On]  
[Off]  
Suspend/Resume switch.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 16. Advanced Features Submenu  
Table 16: Fields, Options and Defaults for the Advanced Features Submenu of the Power Menu  
Menu Field  
Options  
Default  
Description  
Suspend/Resume  
Switch:  
Disabled  
Enabled  
[Enabled]  
Sets the function of the Suspend/Resume button when your note-  
book is in an active state. The resume function can not be disabled  
as it works regardless of any other settings.+  
Lid Closure  
Suspend:  
Off  
On  
[On]  
[On]  
Enables and disables having closure of the Display panel put your  
notebook in Suspend mode.  
Lid Open Resume:  
Off  
On  
Enables and disables having opening the Display panel acting as an  
automatic resume.  
Exiting from Power Menu  
When you have finished setting the boot parameters with  
the Power menu, you can either exit from the setup  
utility or move to another menu. If you wish to exit from  
the setup utility press the [Esc] key to go to the Exit  
menu. If you wish to move to another menu, use the  
cursor keys.  
23  
 
L i f e B o o k  
P
S e r i e s B I O S  
BOOT MENU SELECTING THE OPERATING SYSTEM SOURCE  
The Boot Menu is used to select the order in which the  
BIOS searches sources for the operating system. Follow  
the instructions for Navigating Through the Setup Utility  
to make any changes.  
The following tables show the names of the menu fields  
for the Boot menu and its submenu, all of the options  
for each field, the default settings and a description of  
the fields function and any special information needed  
to help understand the fields use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Boot  
Item Specific Help  
Quick Boot:  
[Enabled]  
Boot Time Diagnostic Screen:  
[Disabled]  
[Disabled]  
All diagnostic tests  
will be done.  
Preboot Execution Environment  
Boot Device Priority  
[Disabled]  
[Enabled]  
Some diagnostic tests  
may be skipped while  
booting to speed up.  
[Auto]  
Diagnostic tests will  
be automatically  
skipped or done  
according to the order  
of the ACPI OS.  
F1 Help  
ESC Exit  
Select Item -/Space Change Values  
Select Menu  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 17. Boot Menu  
Table 17: Fields, Options and Defaults for the Boot Menu  
Menu Field  
Options  
Default  
Description  
QuickBoot Mode:  
Disabled  
Enabled  
Auto  
[Enabled]  
Turns on and off booting with a truncated set of Power On Self  
Test. (Fewer tests mean faster turn on.)  
Boot-time  
Diagnostic Screen:  
Disabled  
Enabled  
[Disabled]  
[Disabled]  
Turns on and off display of test results instead of Fujitsu logo screen  
during Power On Self Test.  
Preboot Execution  
Environment  
Disabled  
Enabled  
Turns off and on the preboot execution environment feature.  
This menu allows setting up the source for the operating system.  
Boot Device  
Priority  
Selects the Boot  
Device Priority  
submenu  
24  
 
B o o t M e n u  
Boot Device Priority Submenu of the Boot Menu  
The Boot Device Priority submenu is for setting the  
order of checking of sources for the operating system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Boot  
Boot Device Priority  
Item Specific Help  
The top device has the  
highest priority.  
Floppy Disk Drive  
+Hard Disk Drive  
USB CD-ROM Drive  
<Enter> expands or  
collapses devices with  
a + or -.  
<Ctrl+Enter> expands  
all.  
< > or < > selects a  
device.  
<+>/<Space> or <->  
moves the device up or  
down.  
<Shift + 1> enables or  
disables a device.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 18. Boot Device Priority Submenu  
Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu  
Menu Field  
Options  
Description  
Floppy Disk Drive  
–—  
The boot selections determine the order in which the BIOS searches for  
the operating system during a startup sequence. To change the order  
highlight one source by using the [up] or [down] cursor keys and then  
press the [+] or [-] key to change the order number for that source. Be  
sure to save your changed order when you exit the BIOS setup utility.  
Hard Disk Drive  
TOSHIBA MHK2018GAP-(PM)  
Bootable Add-in Cards  
–—  
USB CD-ROM Drive  
There is no USB CD-ROM device currently available for this system; this option is reserved for future use.  
Exiting from Boot Menu  
When you have finished setting the boot parameters with  
the Boot menu, you can either exit from the setup utility  
or move to another menu. If you wish to exit from the  
setup utility press the [Esc] key to go to the Exit menu. If  
you wish to move to another menu, use the cursor keys.  
25  
 
L i f e B o o k  
P
S e r i e s B I O S  
INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION  
The Info menu is a display-only screen that provides the  
configuration information for your notebook.  
P O I N T S  
The following table shows the names of the menu fields  
The asset number is an optional user-entered field  
for the Info menu and the information displayed in those  
fields. These fields are for information purposes only, and  
are not editable (except for the Asset Number as in the  
Point below).  
and can be entered through the use of third party  
DMI Compliant software, such as LANdesk Client  
Manager.  
The information displayed on this screen is variable  
according to the unit you purchased.  
PhoenixBIOS Setup Utility  
Security Power Savings  
Main  
Advanced  
Boot  
Info  
Item Specific Help  
BIOS Version:  
BIOS Date:  
BIOS Area:  
1.02e  
11/08/2001  
E400h - FFFFh  
CPU Type:  
CPU Speed:  
L1 Cache:  
L2 Cache:  
Transmeta TM5500 processor  
700 MHz  
128 KB  
256 KB  
Total Memory:  
112 MB  
CMS Mode:  
CMS Revision:  
OEM ID:  
Normal  
4.2.6-8-168  
FJCFG-0105000103  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 19. Info Menu  
26  
 
I n f o M e n u  
Table 19: Fields, Options and Defaults for the Info Menu  
Menu Field  
BIOS Version:  
BIOS Date:  
BIOS Area:  
CPU Type:  
Default  
Menu Field  
L2 Cache:  
Default  
1.02e  
256 KB  
11/08/2001  
Total Memory:  
CMS* Mode:  
CMS* Revision:  
OEM ID:  
112 MB  
E400h FFFFh  
Transmeta TM5500 processor  
700 MHz  
Normal  
4.2.6-8-168  
FJCFG-0105000103  
CPU Speed:  
L1 Cache:  
128 KB  
*CMS = Code Morphing Software (Crusoe processor  
software architecture that results in longer battery  
life.)  
27  
 
L i f e B o o k  
P
S e r i e s B I O S  
EXIT MENU LEAVING THE SETUP UTILITY  
The Exit Menu is used to leave the setup utility. Follow  
the instructions for Navigating Through The Setup  
Utility to make any changes.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Boot  
Exit  
Item Specific Help  
Exit Saving Changes  
Exit Discarding Changes  
Load Setup Defaults  
Discard Changes  
Exit System Setup and  
save your changes to  
CMOS.  
Save Changes  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 20. Exit Menu  
The following table shows the names of the menu fields  
for the Exit menu, the default settings and a description  
of the fields function and any special information  
needed to help understand the fields use.  
Table 20: Fields, Options and Defaults for the Exit Menu  
Optional Keyboard  
Menu Field  
Default  
Description  
Shortcut  
Exit Saving  
Changes  
Press the F10key  
–—  
Exit Saving Changes and Exit will store all the entries on every  
menu of the setup utility to the BIOS memory and then exit the  
setup utility. A confirmation message Save Configuration  
changes and exit now? [Yes] [No] will be displayed.  
Exit Discarding  
Changes  
–—  
–—  
Selecting Exit Discarding Changes and Exit will exit the setup  
utility with out writing to the BIOS memory. When the BIOS  
recognizes this selection it will load the operating system and  
begin operation.  
28  
 
E x i t M e n u  
Table 20: Fields, Options and Defaults for the Exit Menu  
Optional Keyboard  
Menu Field  
Default  
Description  
Shortcut  
Load Setup  
Defaults  
Press the F9key  
–—  
Selecting Load Setup Defaults will load the factory preset default  
values for all menu fields, then display the message Load  
default configuration now? [Yes] [No]. When con-  
firmed the setup utility will return to the Exit Menu. To return to  
another menu follow the directions in the Navigating Through The  
Setup Utility section.  
Discard Changes  
Save Changes  
–—  
–—  
–—  
–—  
Selecting Discard Changes will load the previous values in BIOS  
memory for all menu fields. The message Load previous now?  
[Yes] [No] will be displayed. When confirmed the setup utility  
will return to the Exit menu. To return to another menu, follow the  
directions in the Navigating Through The Setup Utility section.  
Selecting Save Changes will cause the new settings in all menus to  
be written to the BIOS memory. The message Save configura-  
tion changes now? [Yes] [No] will be displayed. When  
confirmed, the setup utility will return to the Exit menu. To return to  
another menu, follow the directions in the Navigating Through The  
Setup Utility section.  
29  
 

Estate Range TGG222VD User Manual
Euro Pro Iron EP171 User Manual
Extron electronic Stereo Amplifier MDA 3 Series User Manual
Extron electronic Switch VSC 50 User Manual
Fisher Price Baby Accessories M6711 User Manual
Fisher Price Motorized Toy Car B5732 User Manual
Furman Sound Power Supply AC 215 User Manual
Gaggia Espresso Maker SUP027YDR User Manual
GE Car Stereo System DBXR463EDCC WW User Manual
GE Freezer FCM7DM User Manual